Deutsch 
English The OCI400 is an optical interface for data transmission from automatic combustion controllers to end devices with RS-232 interfaces. Using the ACS410 software (must be ordered separately), it enables the viewing and recording of data sent by the automatic combustion controller.
The OCI400 serves as the link for transmitting information and data from automatic combustion controllers or burner management systems to end devices, such as PCs or flue gas analyzers. It converts the light signals sent by the automatic combustion controllers or burner management systems into electrical signals, which can then be processed by suitable software on the end devices.
Data transmission from the automatic combustion controllers or burner management systems takes place via the existing red LED indicator in the release button.
The data stream emitted in the visible light spectrum is received, amplified, and processed by a photoreceptor in the OCI400. To this end, the OCI400 interface is plugged onto the release button of the automatic combustion controllers or burner management systems.
The OCI400 is used in conjunction with the following automatic combustion controllers:
• LMO...
• LMG... with adapter ring
• LME1…, LME2…, LME3…, LME4…, LME6…
Technical Data:
- Cable length: approx. 1.5 m
- Connector: SUB-D 9 female
- Protection class: IP40
The OCI400 serves as the link for transmitting information and data from automatic combustion controllers or burner management systems to end devices, such as PCs or flue gas analyzers. It converts the light signals sent by the automatic combustion controllers or burner management systems into electrical signals, which can then be processed by suitable software on the end devices.
Data transmission from the automatic combustion controllers or burner management systems takes place via the existing red LED indicator in the release button.
The data stream emitted in the visible light spectrum is received, amplified, and processed by a photoreceptor in the OCI400. To this end, the OCI400 interface is plugged onto the release button of the automatic combustion controllers or burner management systems.
The OCI400 is used in conjunction with the following automatic combustion controllers:
• LMO...
• LMG... with adapter ring
• LME1…, LME2…, LME3…, LME4…, LME6…
Technical Data:
- Cable length: approx. 1.5 m
- Connector: SUB-D 9 female
- Protection class: IP40