Deutsch 
English Electro gas safety solenoid valve type VMR of class A - group 2 (EN 161). The VMR solenoid valve is a normally closed, quick-opening and quick-closing safety valve. In the idle state, the spring presses on the shut-off and keeps the gas passage closed. When the coil is energized, the valve opens (t <1 s). As soon as the voltage is interrupted, the valve closes immediately. This valve is suitable for controlling gas and air in atmospheric gas burners or forced draught gas burners, in industrial ovens and for all gas appliances that use gas control lines. (Suitable for continuous operation - 100% duty cycle). Adjustable volume flow.
Technical data:
Connection with thread: Rp 2” (ISO 7/1)
Operating voltage: 230 V, 50/60 Hz, 45 W
Pmax: 500 mbar
Closing time: < 1s
Protection class: IP54
Pressure measurement connection: G 1/4” on both sides
Filter: 600 µm
Gas type: Air and non-aggressive gases 1, 2 and 3 (EN 437)
Dimensions: 156x230x106 mm
The basic requirements of the following directives are met: 90/396/EEC (CE-0063AQ1350), 73/23/EEC, 89/336/EEC.
Technical data:
Connection with thread: Rp 2” (ISO 7/1)
Operating voltage: 230 V, 50/60 Hz, 45 W
Pmax: 500 mbar
Closing time: < 1s
Protection class: IP54
Pressure measurement connection: G 1/4” on both sides
Filter: 600 µm
Gas type: Air and non-aggressive gases 1, 2 and 3 (EN 437)
Dimensions: 156x230x106 mm
The basic requirements of the following directives are met: 90/396/EEC (CE-0063AQ1350), 73/23/EEC, 89/336/EEC.