Deutsch 
English The SQM33 actuators are designed to drive oil pressure regulators, butterfly valves, throttle valves or other applications with rotary motion. Fields of application are oil burners and gas burners of medium and high output. They are preferably used for load-dependent control of gas flow, oil volume and combustion air volume in conjunction with the LMV27 / LMV37 electronic pack controllers.
Technical data:
Type: SQM33.550A9
Cable length: 3.6 m
Supply voltage: 24 V ±20% (interface load)
Power consumption: Max. 7.5 W
Permissible duty cycle: 50 %, max. 3 min. without interruption
Operating angle, usable range: Between 0° and max. 90°
Installation position: any
Protection class: IP54 according to EN 60529-1
Actuating direction: Adjustable on the basic device
Running times: Determined by the basic device
Direction of rotation (looking against the shaft):
• Standard (anti-clockwise), • inverted (clockwise)
Other SQM33 actuators also available on request!
Technical data:
Type: SQM33.550A9
Cable length: 3.6 m
Supply voltage: 24 V ±20% (interface load)
Power consumption: Max. 7.5 W
Permissible duty cycle: 50 %, max. 3 min. without interruption
Operating angle, usable range: Between 0° and max. 90°
Installation position: any
Protection class: IP54 according to EN 60529-1
Actuating direction: Adjustable on the basic device
Running times: Determined by the basic device
Direction of rotation (looking against the shaft):
• Standard (anti-clockwise), • inverted (clockwise)
Other SQM33 actuators also available on request!