Deutsch 
English Clamping base AGK 11 for phase-controlled automatic burner controls LOA, LMO, LGA, LGB and LME.
•In addition to the 12 connection terminals
- 3 neutral conductor terminals, pre-wired to terminal 2, the neutral conductor input
- 4 protective conductor terminals that end in a lug for earthing the burner
- 2 support point terminals with the designations “31” and “32”.
• There are 2 openings for the cable entry through the base of the AGK11 plug-in base
• There are spring-loaded metal tabs on both narrow sides, which engage audibly when the appliance is plugged into the housing
• A slight tilting movement of a screwdriver in the guide slots of this fastening element is sufficient to loosen it.
• Neutral conductor terminals and support point terminals with self-forming screws - Terminal blocks with self-locking screws
• Supplied with terminals already opened for quick assembly
If required, gland holders AGK65 or cable holders AGK66 should be ordered in addition.
•In addition to the 12 connection terminals
- 4 protective conductor terminals that end in a lug for earthing the burner
- 2 support point terminals with the designations “31” and “32”.
• There are 2 openings for the cable entry through the base of the AGK11 plug-in base
• There are spring-loaded metal tabs on both narrow sides, which engage audibly when the appliance is plugged into the housing
• A slight tilting movement of a screwdriver in the guide slots of this fastening element is sufficient to loosen it.
• Neutral conductor terminals and support point terminals with self-forming screws - Terminal blocks with self-locking screws
• Supplied with terminals already opened for quick assembly
If required, gland holders AGK65 or cable holders AGK66 should be ordered in addition.